ATA-7050B High Voltage Amplifier
- Bandwidth (-3dB)：DC~5kHz
- Voltage：10kVp-p（±5kVp）
- Current：20mAp
- Power：100Wp
- Slew rate：≥111V/μs
- Product Introduction
- Specifications
- Technical Documentation
- Options & Software
- Video
The ATA-7050B is an ideal high voltage amplifier capable of amplifying both AC and DC signals.It features four-quadrant output with a maximum voltage of 10kVp-p (±5kVp), and can stably provide both positive and negative voltage and current to drive capacitive or inductive loads.
CONTROL
The high-voltage output is controlled via a dedicated output switch in conjunction with a BNC enable connector.
When the BNC shorting cap is connected, the device is in the output ON state. When the BNC shorting cap is removed, the device is in the output OFF state, and the control panel displays UNABLE OUTPUT_OFF.
Voltage Gain
Voltage gain can be digitally adjusted in 1step or 10step increments. One-click saving of commonly used settings makes operation more convenient and user-friendly. Combined with the gain display on the LCD panel, the voltage can be quickly and precisely adjusted as needed.
OUTPUT PROTECTION
In the single-shot protection output mode, even if the output is short-circuited due to load breakdown, the device will cut off the output, making it highly suitable for capacitive loads or application scenarios with large current fluctuations.
DYNAMIC RESPONSE ADJUSTMENT
Dynamic adjustment using a one-turn rotary panel potentiometer optimizes AC response for various load parameters.
