ATA-2048 High Voltage Amplifier
- Bandwidth (-3dB)：DC~1MHz
- Voltage：400Vp-p（±200Vp）
- Current：80mAp
- Power：16Wp
- Slew rate：≥888V/μs
- Voltage Monitor：10mV/V
- Current Monitor：10V/A
- Product Introduction
- Specifications
- Technical Documentation
- Options & Software
- Video
The ATA-2048 is an ideal single-channel high-voltage amplifier capable of amplifying both AC and DC signals. It delivers a maximum output of 400 Vp-p (±200 Vp),Maximum bandwidth: 1 MHz.The input and output impedance can be switched between two levels. The voltage gain is digitally adjustable, with parameters automatically saved. The device features program control functionality, offering simple and convenient operation. It can be used with signal generators for seamless signal amplification.
LCD PANEL DISPLAY
The LCD panel display dynamically shows the device status and parameters, offering a clear and intuitive interface.
Voltage Gain
The voltage gain is digitally adjustable from 0~60x, with two modes: coarse adjustment (1 step) and fine adjustment (0.1 step). Combined with the LCD panel display, it enables quick and precise adjustment to the desired voltage value.
Input
The input uses a BNC interface with selectable impedance of 50Ω or 10kΩ, perfectly matching both high and low impedance signal sources.
Output
The output uses banana sockets, with a maximum output voltage of 400 Vp-p (±200 Vp) and a maximum output current of 80 mAp.
Monitor
10mV/V Monitor: This port voltage is 1/100 of the output port voltage. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output voltage.
10V/A Monitor: The monitoring port voltage is 10 times the output current. The monitoring port uses a BNC connector and can be directly connected to an oscilloscope for real-time monitoring of the output current.
